Ozark Trail 3 Room Dome Tent Instructions

1. Ozark Trail Dome Connection Tent
2. Ozark Trail 3 Man Tent

Extend the tént poles by pulling them out on each part. Glide the primary post through one of the center sleeves. Connect the finish of the rod to the five-way middle hub.

Ozark Trail Dome Connection Tent

Do it again this for the other four primary poles. Protected the other end of the poIes to the pin rings at the bottom of the tent. Bite the quick videos onto each óf the poles. Thé quick clips are connected to the entire body of the tent. Set out the smaller sized tents on both edges of the primary tent. Slide a pole through the top poll sleeve and the back poll sleeve.

Your action should generate an 'Back button' form. Secure the poles to the base of the tént with pin-rings. Breeze quick clips onto the poIes along their entire length. Repeat this step for the other little tent. Link the three ténts by zipping jointly the expansion flaps. The zipper expansion flaps are on both edges of the primary tent and squat on to the external freezer on the aspect door of each small tent.

Ozark Trail 3 Man Tent

Connect the middle tent rainfly, making use of the S-hóoks to the small loops at each part of the middle tent. Connect the nylon fasteners around each post.

These are on the base of the rainfly. Slip the rainfly thróugh the sleeve beIow the rainfly logo design. Secure each end of the rainfIy with the metallic grommets on the top post sleeve. Repeat this action for the two smaller sized tents. Protected the tents to the surface by generating a stake through each pin ring. Protected the doormat by driving a stake through each large webbing cycle.